target temperature meaning in Chinese
需要温度
Examples
- The slab target temperature function of optimizing temperature decision of heating furnace and its solution method for delay rolling were introduced
摘要介绍了钢坯加热炉优化待轧炉温决策的目标函数及求解方法，并提出了运用在实际控制系统中的一种优化待轧炉温解决方案。 - It was found that the thin films and target were of similar composition . the optimal deposition temperature was 150 - 200 and the tcr of thin films were strongly influenced by the target temperature
发现磁控溅射法可以沉积得到与靶材组分一致的锰铜薄膜，沉积的最佳温度为150 200 ’ c ，并且阴极靶的温度对薄膜tcr有很大的影响。 - To decrease the influence of phase separation trend , it was suitable to choose proper conditions for the preparing of the precursor and to reach target temperature asked by the syntheses as quickly as possible
为了减小分相趋势对合成纳米srceo3粉体的效果的影响，应该选择合适的前驱物制备条件，迅速提供使前驱物得以转化为目的产物所要求的反应温度条件。 - Scrap steel will be loaded into steelmaking furnace and molten after sieving and dewetting . if the chemical composition and target temperature of molten steel are satisfied , the molten steel will be poured into ladle and conveyed to continuous caster , then be made as billet with specified length
废钢铁经筛选去湿，装入炼钢炉冶炼融化成钢水，当达到要求的化学成分及温度目标值时，将钢水倒入钢水包，送至连铸机，浇铸成定尺长度的钢坯 - The cooling system for engine adopted hydraulic drive and control technology to control the speed of the fan : the chip adjust the control - current of the proportional value , which used in the engine cooling system , to control the speed of the fan . and the size of the control - current is according to the coolant temperature , coolant temperature change rate and target temperature . as for as the hydraulic cooling system we used a motor to drive and control the fan ’ s work or stop according to the temperature of the hydraulic oil
该系统的特点及其实现的功能为:电液混合驱动方式改变了工程机械冷却装置驱动方式单一的缺点,发动机冷却系统采用了电液比例技术控制风扇转速;单片机可以根据冷却液温度、冷却液温度变化率和目标冷却液温度调节液压驱动系统中电液比例阀的控制电流,进而控制液压油的流量,即可以实现冷却风扇转速的连续调节;液压油冷却系统采用了电动机驱动,然后由单片机根据液压油的温度控制电动机的起动和停止。